Tools

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

- Sealed bearing extractor with 1/2-inch thru hole for use with Wheels Mfg. 1/2-inch threaded rod press handles - Part of a system that requires additional pieces to function

Receiver cup sleeve for Wheels Mfg. sealed bearing extractors. Machined aluminum sleeve, anodized red. - 1/2-inch thru hole to fit over their 1/2-inch threaded rod press handles - Part of a system that requires additional pieces to function

Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

This 7-piece adapter set is used to install 22mm and larger inside diameter sealed bearings into bottom brackets. Includes adapters for the most common bottom bracket bearings for Shimano outboard cup BBs (HollowTech II), SRAM GXP, Truvativ, FSA, PF30 and BB30 bottom bracket bearings. - Includes open bore drifts for 6805, 24x37, BB30, PressFit30, GXP and BB86 bearings - 10mm ID hole, for use with Wheels Manufacturing bearing press handles - Compatible with Wheels Mfg. PRESS-1 or PRESS-4 handles

- Machined to match manufacturer specifications and designed to be used with a 1/2" drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

Wheels Manufacturing Sealed Bearing Extractor - 9mm Fits: - 609 - 9227 - Other bearings with an inside diameter of 9mm

Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step

- Essential bottom bracket bearing extractor set - (1) 6806 extractor, (1) 24x37 extractor, (1) 29 DUB extractor, (1) 22mm GXP extractor

Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually

Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red

BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.

- Advance bottom bracket bearing extractor set - (1) BE-22mm, (1) BE-24mm, (1) BE-29mm, (1) BE-30mm, (1) Bearing Pusher, (1) 39mm sleeve, (1) 42mm sleeve, (1) 44mm sleeve, (1) receiver cup

Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6000 - 6200 - 6800 - 6900

- Allows for quick and accurate positioning at the press of a button - Slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings

Wheels Manufacturing Sealed Bearing Extractor - 30mm Fits: - 6806 - Other bearings with an inside diameter of 30mm

- Essential bearing press for installation of bearings with a 10mm minimum ID - (1) 3/8 ACME threaded rod, (2) 30mm standoffs, (2) threaded handles

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.

Frame linkage standoff works with Wheels Mfg. bearing press handles. Acts as a spacer to allow the press handles to fully seat bearings over suspension linkages that protrude beyond the face of the bearing. - OD: 15.8mm / ID: 9.9mm - Machined aluminum - Anodized red - Sold individually

The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)

Pusher for Wheels Mfg sealed bearing extractors. - For use with Wheels Mfg. 1/2-inch threaded rod press handles - Part of a system that requires additional pieces to function

The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125". The gauge can measure: - bottom bracket width - bottom bracket shell inner diameter - crank spindle length - crank spindle diameter - bearing inner diameter Specifications: Measures crank spindle diameters: 22mm, 24mm, 29mm, 30mm Measures bearing inner diameters: 22mm, 24mm, 29mm, 30mm Measures bottom bracket shell inner diameters: 37mm, 41mm, 42mm, 46mm Measures bottom bracket shell widths: 61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm Measures crank spindle lengths up to 180mm

This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups

Wheels Manufacturing Sealed Bearing Extractor - 8mm Fits: - 608 - 688 - Other bearings with an inside diameter of 8mm

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

- Bearing extractor set for small bearings - (1) 608, (1) 609, (1) 6000, (1) 6001

Wheels Manufacturing Sealed Bearing Extractor - 17mm Fits the following bearings: - 6003 - 6803 - 6903 - 17287

- Heavy duty double-ended steel lockring wrench - 10.5" long for plenty of leverage - Fits most bottom bracket lockrings

Comprehensive shop kit for servicing Wheels Manufacturing bottom brackets. A 168-piece kit in a durable plastic storage box. Includes most replaceable parts found in our bottom brackets. This kit compliments our Drivetrain Spacer Kit, which is perfect for adjusting bottom bracket installations. Kit Includes: - (4) 6806 ABEC-3 Bearings - (4) 24x37 ABEC-3 Bearings - (2) 22x37x8 GXP ABEC-3 Bearings - (10) 24mm ID Outer Silicone Seals - (10) 30mm ID Outer Silicone Seals - (6) 22mm ID GXP Outer Silicone Seals - (20) 0.5mm 24mm ID Spacers - (20) 1.0mm 24mm ID Spacers - (8) 2.5mm 24mm ID Spacers - (10) BB30/PF30 30mm ID Wave Washers - (10) GXP 24mm ID Wave Washers - (20) 0.5mm 30mm ID Spacers - (20) 1.0mm 30mm ID Spacers - (8) 42x44x2 Outer Cup O-Rings - (6) 30x32x2 Outer Cup O-Rings - (6) 32x1.5 Inner Cup O-Rings - (4) 7/8"x1/16" O-Rings

- SRAM Thin Flange T47 Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. - This single-sided socket is used for installing and removing 52mm, 16-notch bottom bracket cups. - The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto a 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. - Machined 6061 Aluminum Anodized Red