Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Brakes/Levers/Pads

Our floating discs have been redesigned with a wider braking surface to enable them to be used as a replacement on many other braking systems in addition to our own FEATURES - Constructed in two parts, aluminium centre and stainless steel braking surface. - High performance disc, allowing the stainless steel outer to expand separately from the centre and handle high temperatures without warping. - Hope floating rotors have a true floating design which allows 1 degree of freedom. This means the outer is always free to expand when subjected to heat. - Lightweight design. - Aluminium centre acts as heat sink keeping disc temperatures lower. - CNC machined centre is stiff and lightweight so has the advantages of a thicker fixed disc without the weight penalty.
KEY FEATURES - Brake pads include spring clip and pin - Brake pads are dyno tested in-house in Barnoldswick - Available for all our current brakes and older models - All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity - We keep a wide range of pads to suit all our brakes
Round edge braking surface. Custom steel braking surface riveted to an aluminium central carrier. Standard 6 bolt fitting. Available in: 160mm only. Floating design deals with changes in temperature. Available in our six colour options. Weight: 115g. **IMPORTANT NOTICE**Please ensure you have sufficient clearance to use this rotor, pay attention to any possible interference with caliper mount, frame, etc. KEY FEATURES - Round edge braking surface - Custom steel braking surface riveted to an aluminium central carrier - Standard 6 bolt fitting - Available in: 140mm & 160mm - Floating design deals with changes in temperature - Weight: 115g - Available in black, silver, bronze, red, blue, purple & orange
The XCR Pro lever is the ultimate in lightweight design. With a Carbon lever blade and titanium hardware, combined with an XCR X2 caliper you have the benchmark lightweight brake KEY FEATURES - Lightweight minimalist design - Carbon blade and titanium hardware - Lever reach adjustment - Hinge clamp for easy installation - CNC Machined from high grade forged aluminium billet - 10% Power increase over Race Evo lever - Postmount and Flatmount Caliper Options available - Crimped hose design on caliper - Rigid CNC'd one piece caliper - Lightweight aluminium backed pads - Compatible with all current Tech 3 shifter mounts - Available in Black, Silver, Bronze, Red, Blue, Orange & Purple - Available with black hose only - Weight from 199g - Maximum Rotor thickness for X2 caliper 2.3mm Flatmount Caliper Mount options: - Mount Z: Required to fit the X2 FM caliper onto Front Flatmount standard and use a Ø160 disc – Front Flatmount standard is typically found on road/gravel/CX forks - Mount Y: Required to fit the X2 FM caliper onto Rear Flatmount standard using Ø160 disc – Rear Flatmount std is typically found on the back of some road/grave/CX frame but also lately on light XC frames - The caliper will also fit directly on Flatmount rear standard using a Ø140 disc. For more information please see Hope's guides in the manuals and diagrams section. **Note** - The Flatmount X2 caliper is designed for use with the Hope Tech 3, XCR Pro and Tech/Tech Evo levers only.
$1.90
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$2.39
Brass compression olive for Hope hydraulic disc brakes.
$4.28
Brass hose insert for Hope hydraulic disc brakes.
$4.48
Hope 5mm Standard Hose Kit with Fittings for Hope Brake
$22.00
Hope Disc Brake adaptors are CNC-machined and ensure a perfect fit with all Hope Brake sets. - CNC machined in Barnoldswick, England - Includes mounting bolts
$22.00
Our mounts are all CNC machined to offer precise fitting to most frames and forks. KEY FEATURES - We hold a wide selection of caliper mounts to fit perfectly with our brake systems - Most of our mounts are available in a choice of black or silver - Brake mounts are machined from T6 2014 alloy - We have designed the brackets only for the purpose stated - All mounts are supplied with bolts for mounting to frame/fork *NOTE: Will not work with most Post Mount Marzocchi forks* - Weight from: 20g - All mounts come with bolts to fit to fork/frame - A wide selection to fit most combinations - CNC machined
$22.00
Our mounts are all CNC machined to offer precise fitting to most frames and forks. KEY FEATURES - We hold a wide selection of caliper mounts to fit perfectly with our brake systems - Most of our mounts are available in a choice of black or silver - Brake mounts are machined from T6 2014 alloy - We have designed the brackets only for the purpose stated - All mounts are supplied with bolts for mounting to frame/fork *NOTE: Will not work with most Post Mount Marzocchi forks* - Weight from: 20g - All mounts come with bolts to fit to fork/frame - A wide selection to fit most combinations - CNC machined
$25.00
Pads available in a range of compounds for all Hope brakes - whatever the age. All pads are designed and dyno tested in-house at Barnoldswick. Available in Race, Standard, Sintered and Road compounds KEY FEATURES - Choice of Race, Standard or Sintered compounds for all MTB brakes. Road compound available for RX4+ calipers. - Brake pads include spring clip and pin - Brake pads are dyno tested in-house in Barnoldswick - Available for all our current brakes and older models - All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity - We keep a wide range of pads to suit all our brakes
$55.93
Hope Brake Line kits • Works for front or rear • Made for Hope by Goodridge • Fits most manufacturer's disc brakes • Braided stainless steel line • Hose length: 1600mm • Hose OD: 6mm • Hose ID: 2.4mm
Page 1 of 1